We are using a tour 9-cylinder radial engine valve push rods made out of high strength carbon tubes with a ball / pan System. These push rods are functioning very well.
We make our push rods with Special care in 9 individual steps, using the best materials possible.
The balls consist of Chrome Vanadium steel type without wear.
Minimized Transmission loss because of the optimized knuckle Joint of the ball / pan system
50 % less weight because of the light but high strength carbon tubes. 50 % less moving mass in asking for 50 % less energy effort. That makes it significantly easier for the valve steering System.
There is less friction at the cam disk. The adjusted valve clearance remains consistent.
Higher Rotation Speed will be possible at the regularly valve Timing.
The carbon tube is light and generates no own momentum.
At the same time it absorbs vibrations. I have never lost a push rod.
adjusting screws and nuts
HS Valve Adjust Gauge
Push Rod Grease
fork wrench 5,5
about 5 days (order production)
Please note two different length are available as MOKI S 250 !
On request, we will be happy to install it for your - please contact us !
Special Length upon demand ! Please feel free to contact us !