StarGlow II for 7-Cylinder

Description:

• redesigned board with SMD parts and microcontroller (high resistant for vibration)

• double boards with double-sided mounting (compact construction)

• integrated pulse amplifier (Receiver amplifier)

• low electricity intake because of clocked system

• glow current functioning by control modules (for each glow plug a separate poti)

• integrated  voltage control of accu

• no damage by overvoltage - when one glow plug fails, the other glow plugs are not influenced

• LED-display at regulator, direct LED-Display of the glow plug's functioning

• LED-diplay with bright diodes (blue)

• integrate test output plug - for continouous Operation without remote control (e.g. test-station)

• including on/off installed

• including multiplex battery adapter cable installed (produced at PowerBox Systems)

• including positive cable with screws and discs, gold plug

• Receiver connecting cable: Graupner/JR servo cable with gold contacts (VOGEL-BLUE-LINE-SILICON)

Glow Battery:

The glow battery should have a voltage of

• 7,4 V (2x LiPo-cells) or

• 7,2 V (6x NiXX-cells)

The capacity should be chosen according to the number of glow plugs.

For 30 minutes of constant glowing the following applies approximately:

• 3 glow plugs -> 1200 mAh

• 5 glow plugs -> 1800 mAh

• 7 glow plugs -> 2400 mAh

• 9 glow plugs -> 3000 mAh

Programming:

• easy programming (external LED to display the programming functioning)

• main functions are programmable by remote control

Technical Datas:

• Dimension: 68 x 46 x 25 mm

• Weight 115 g

Scope of delivery:

• Glow plug regulator

• Multiplex battery Adapter cable

• On/off switch

• Positive cable to engine incl. screws and discs

• four fastening screws

• Screwdriver PH00 (to adjust the Poti)

Accessory:

• see Accessory for StarGlow II

 User Manual

Delivery: on stock